After-Sales Service And Application Service - Bosch Atino Originalbetriebsanleitung

The areas around the outlet aperture of the laser in particular should be cleaned on a reg-
ular basis. Make sure to check for lint when doing this.
Cleaning the Gel Pad
Clean the gel pad (14) whenever it has become contaminated with dust or other
particles, or if its adhesive strength has been reduced.
Only wash the gel pad when it has been detached from the tool. The measuring
u
tool itself must not be washed or submerged in water.
To detach the gel pad, turn the gel pad holder (13) anticlockwise and take off the holder.
Rinse the gel pad (14) with water. Wash it as necessary using a common household neut-
ral soap or a detergent. Do not use any cleaning agents that contain alcohol or solvents. If
necessary, the protective cap (15) should also be cleaned.
Leave the gel pad, holder and protective cap to dry completely. The gel pad must not be
warmed up (e.g. through warm air or heating).
Place the protective cap (15) on the gel pad (14) and turn it clockwise to lock it in place.
Place the gel pad holder (13) on the measuring tool and turn it clockwise to secure it.
If the adhesive strength is still not sufficient even after the gel pad (14) has been
cleaned, it should be replaced.

After-Sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and repair of
your product as well as spare parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about
our products and their accessories.
In all correspondence and spare parts orders, please always include the 10‑digit article
number given on the nameplate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product
in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools
English | 25
1 609 92A 55E | (12.05.2020)