PNI ESCORT HP 55 Benutzerhandbuch Seite 16

Briefly press the EMG key again to exit emergency mode.
To change the frequency table and the standard, follow the steps below:
1. Briefly press the keys below in the following order:
F - UP (key ► from the front panel of the microphone) - A/F - RFG - SC
2. Press the ◄ or ► keys to select one of the 1 Tb, 2 Tb, or 3 Tb tables.
3. Briefly press the F key to confirm the selection.
4. Now you have entered the norm selection mode. The current standard
(e.g. CE) appears on the screen.
5. Briefly press the ◄ and ► keys to navigate through the standards.
6. Stop at the standard specific to the country you are in.
7. Briefly press the PTT key to confirm the selection.
8. The radio will exit the frequent table selection mode and return to the
standard display mode.
Note: If you do not want to change the frequency table but only the norm inside
the table you are already in, execute the key sequence below:
F - A/F
Now you have entered the norm selection mode. The red LED will flash 3
times. Use the ◄ or ► keys to select the desired norm. Press PTT to confirm.
Note: When the radio is in the UK standard, long press the A/F key to quickly
switch to the CE standard.
Reset
To return to the factory settings, press the following keys in the order below:
F - ►- EMG
The red LED will flash 3 times and the radio will restart.
User manual 16