AC Schnitzer 1812 329 3109 Montageanleitung Seite 16

F itt in g In st ru ct io ns
AC Schnitzer Silencer G29 (4.0i)
Fitting .... (cont'd.)
Fig. 7
Route cable from exhaust flap motor above the heat
shield, and refit heat shield.
Fig. 8
Remove both exhaust brackets from the standard
silencer and fit onto the AC Schnitzer silencer.
Fig. 9
Unscrew the exhaust flap motor from the standard
silencer and attach to the AC Schnitzer silencer using
the coil spring and fixing nuts supplied.
Fitting Instructions No.: 1812 329/ 3109/ -314 / Issue: 14.08.2019 / TSch
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130Fax -135
16