auna Connect Vertical Bedienungsanleitung Seite 53

Adjusting the Volume
• Press the VOLUME+/- buttons on the unit or press VOL +/- on the
remote control to adjust the volume.
• If you wish to turn the sound off, press MUTE button on the remote
control. Press MUTE button again or press VOL +/- on the remote
control or Press the VOLUME+/- buttons on the unit to resume normal
listening.
Initial Set-Up
When you first connect the unit to the mains socket, the display will show
the welcome screen then turn to Standby mode. Press STANDBY/ON
button on unit or button on remote control to power on with Language
menu shown up, press the / buttons on unit or press
remote control to select the language of your choice, then press the SELECT
button on unit or remote control to confirm.
Then the privacy policy page will come up. Please visit the website
mentioned in the page for the details of the privacy policy. Press the SELECT
button on unit or remote control to accept for next step.
1. To launch the initial Setup wizard, press the / buttons on unit or
/ buttons on remote control to select [YES], then press the SELECT
 
button on unit or remote control to confirm.
2. Press the / buttons on unit or
select the following options, then press the SELECT button on unit or
remote control to confirm the setting.
Date/Time 12/24 hour format
Auto Update
Set timezone
Daylight savings
Network settings
/ buttons on remote control to
 
12-Stunden- oder 24-Stunden-Anzeige
einstellen
Choose how you want the time to be
automatically updated.
Update from DAB/ Update from FM/ Update
from Network/ No update
Select a time zone. (Only available when Auto
update from Network is on.).
Select daylight savings. (Only available when
Auto update from Network is on.).
Choose whether keep network connected.
Yes/ No
/ buttons on
 
EN
53