URBANGLIDE RideShoes Bedienungsanleitung Seite 3

Preparation before use
Before your first use, choose where you will learn how to use the product. The hovershoes can be used indoors
or outdoors, however it is important to have a large space (16m²) flat and without obstacles. Avoid frequented
places, where there are other vehicles, children or even animals.
A person with experience who has read the safety rules and instructions in the manual is required to assist you.
Please wear safety equipment (helmet, elbow pads, knee pads) to avoid any risk of accident. Balance
Calibration: Put the Hovershoes parallel to each other. Press the on / off button for 3sec until you hear a beep
and see a flashing light.
Calibration is complete, reboot the system, and test the product. Start: Press the on / off button until you hear
a beep. The LED should be on. First, place one foot on the first hovershoes. The self balance activates, then
slowly place your second foot on the other hovershoes. Keep a vertical position to familiarize yourself with the
product.
Start: Press the on / off button until you hear a beep. The LED should be on. First, place one foot on the first
hovershoes. The self balance activates, then slowly place your second foot on the other hovershoes. Keep a
vertical position to familiarize yourself with the product.
Ascend
Forward
Backward
Stop
Go forward: Lean forward slowly to move forward, then slowly straighten to stop and stop. Do not go too fast
from the beginning.
Backward: Lean back slowly backward, then slowly straighten to stop and stop.
Stop: When you go forwards or backwards, straighten up to stop. You just have to stay upright to stay still.
3