Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Starting up
Install the Driver!
Caution: Do not connect the DockingStation to your computer before installing the driver
from the download area of: https://www.displaylink.com/downloads
Windows®:
1.
Download the correct driver from webpage above.
2.
Click on "Run Setup.exe".
3.
Follow the instructions and finish the driver installation.
4.
Connect the DockingStation to a supported USB 3.0 Type-C™ or USB 3.0 Type-A
port on the PC.
5.
Restart the PC.
6.
The IB-DK2251AC is ready to be used.
macOS®:
1.
Download the correct driver from webpage above.
2.
Run the file Mac_driver\ driver.dmg by double click.
3.
Follow the instructions and finish the driver installation.
4.
Connect the DockingStation to a supported USB 3.0 Type-C™ or USB 3.0 Type-A
port on the macOS® computer.
5.
Restart the computer.
6.
The IB-DK2251AC is ready to be used.
Starting up
1.
Plug in power supply
The device is now powered on!
2.
Connect the USB 3.0 Type-B to Type-C™/Type-A cable
3.
Connect your devices to the appropriate interfaces on the dock
Manual IB-DK2251AC
Werbung
