Star Progetti HELIOSA HI DESIGN 11BX5 Gebrauchsanweisung Seite 18

5. IF WORN, APPLY THE SPARE HEAT-ELASTIC CAPS TO
REPLACE THOSE WHICH HAVE BEEN REMOVED. STRIP THE
CORDS (5-6 mm), APPLY THE NEW SPARE FASTONS AND
FASTEN THEM TO THE CORD.
5
6. CONNECT THE MALE FASTONS TO THE NEW BULB TO
THOSE OF THE TWO CORDS. COVER THEM WITH THE CAPS
AND REPOSITION THE BULB IN THE SEAT OF THE TWO
SPRING CLIP. DO NOT TOUCH THE BULB WITH YOUR BARE
HANDS. REASSEMBLE THE DEVICE BY PERFORMING THE
ABOVE TASKS IN REVERSE ORDER
6
18