System Requirements; Driver Installation - i-tec C31NANODOCKLANPD Gebrauchsanweisung

Ethernet GLAN RJ-45 port - for Ethernet network / router / switch /
7.
HUB and Internet connection
3x USB-A 3.0 port – for connecting the USB devices
8.
SPECIFICATION
• Graphic interface: 1x HDMI, max. resolution 4K 3840x2160/30Hz
• Mode: Extend, Mirror and Primary Display
• Supported colors 16 / 32 bi
• 3x USB 3.0 A port for connecting the USB 3.1/3.0/2.0 devices and for
the high-speed data transfer up to 5 Gbps
• 1x USB-C Power Delivery – Power Delivery with the profile 4
(max.100W) for charging laptops, tablets or smartphones with
support for Power Delivery. To this port you can connect an original
or a universal AC power adapter with USB-C connector, it ensures the
constant charging of your laptop, tablet or smartphone during your
work.
• 1x Ethernet GLAN RJ-45 port for fast network and Internet access
with Gigabit Ethernet connection, it supports speeds of 10 / 100 /
1000 Mbps
• 1x integrated USB-C 3.1 cable for connecting the docking station to
laptop, tablet or smartphone
• Powered through USB bus (no power adapter is needed) or through
USB-C PD
• Chipset: RTL8153B (LAN)
• OS: Requires USB-C interface with „DisplayPort Alternate Mode"
and „Power Delivery" support (not all devices / systems with USB-C
interface support this as standard) or Thunderbolt 3 port – Windows
10 32/64bit, Mac OS X, Chrome OS and Android 6 (Google) with Intel
Broadwell Processor and R51 and higher
• Product dimensions: 130 x 43 x 15 mm
• Product weight: 87 g

SYSTEM REQUIREMENTS

Hardware requirements: Requires USB-C interface with „DisplayPort
Alternate Mode" and „Power Delivery" support (not all devices / systems
with USB-C interface support this as standard) or Thunderbolt 3 port
Operating system: Windows 10 32/64bit, Mac OS X, Google (Chrome OS
and Android 6 and higher) with latest updates

DRIVER INSTALLATION

Windows 10 32/64bit: After connection, the drivers for the docking
Quick Start
| 7
ENGLISH