Sharp LL-T2000A Bedienungsanleitung Seite 22

MENU 3: WHITE BALANCE
Notes:
- On settings other than [STD] not all graduations
can be displayed. To display all graduations, set
to STD.
- Use the buttons to select [COOL], [·], [STD],
[·], [WARM] or [USER].
- Selecting USER will display the setting values for
R-CONT, G-CONT and B-CONT, enabling fine
adjustments.
- To choose a menu option:
- To go to MENU 4:
COOL . . . Color tone bluer than standard
- . . . . . . Color tone slightly bluer than standard
STD . . . . . Color tone standard setting
- . . . . . . Color tone slightly redder than standard
WARM . . . Color tone redder than standard
USER
R-CONT . . . . . . . button for blue-green
button for red
G-CONT . . . . . . . button for purple
button for green
B-CONT . . . . . . . button for yellow
button for blue
Adjusting the screen display
MENU 4: MODE SELECT
Notes:
-
-
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to
the left and right. (
OSD V-POSITION (OSD vertical position)
SELECT button The position of the OSD display can be moved up
MENU button
and down. (
INPUT (Input mode)
The input mode can be set (
400 LINE (degree of resolution)
You can specify the horizontal resolution of a 400-line
screen when using US text, etc. (
Note:
-
EXPAND (Screen expansion)
For display modes of less than 1600 X 1200 pixels,
the display can be expanded if desired.
(
Notes:
-
-
22
To choose a menu option:
When adjustment complete: MENU button
buttons)
buttons)
VESA: VESA mode
MAC: Power Macintosh mode
640: 640 X 400 dot mode
720: 720 X 400 dot mode (US text etc.)
As the resolution input for other than 400 lines is
done automatically, there is no need to set it.
buttons)
OFF: It doesn't expand.
ON1: It expands by the aspect ratio fixation.
ON2: It spreads throughout the whole of the
screen.
Display modes of 1600 X 1200 pixels cannot be
changed.
If a resolution of 1600 X 1200 pixels cannot be
achieved even after expansion is attempted, the
screen's perimeter will display black. (This is not
a malfunction.)
SELECT button
buttons)
buttons)