EcoDim ECO-DIM.08 Handbuch Seite 3

Connection diagram
Dimmer installation 230V
230V Dimmer
L Line
(Often blue
wire)
Input
N Line
(Often brown
wire)
Dimmer installation 12V with LED trafo dimmable
230V Dimmer
L Line
(Often blue
wire)
Input
N Line
(Often brown
wire)
MIN/MAX Settings
For optimal results, you can adjust the lights with the MIN and MAX settings.
MIN adjustment:
Switch on the lighting using the dimmer shaft. Then use a screwdriver
to slowly turn the MIN potentiometer (back of the product) to the right
for stable light. Is the light already stable? Then slowly turn the MIN
counterclockwise for even better dimmability until the lights start flashing
just before the point. That is the best dimmability of these LED lamps.
MAX adjustment:
Switch on the lighting using the dimmer shaft. Then turn the dimmer shaft as
far to the right as possible (maximum light output). Are the lamps flashing?
Then turn the MAX potentiometer (back of the product) slowly to the left
with a screwdriver for stable light in the maximum light position. Is the light
already stable? Then turn the MAX to the right for the maximum light output
of these LED lamps.
Output
LED trafo dimmable
Output
12V
This cord dimmer has been specially developed to be able to dim dimmable
LED lamps. The cord dimmer works from LED power of 0W and you can connect
a maximum LED power of 50W to the cord dimmer. For halogen lamps and light
bulbs the maximum is 100W.
- MIN / MAX settings for optimal light stability
- Memory for the last selected brightness
- Soft-start system
- Push-turn button
- Available in white and black
Manual
Led dimmer phase cut R,C
ECO-DIM.08
ECO-DIM.08 (W) white
ECO-DIM.08 (B) black