Herunterladen Diese Seite drucken

TFA PRIO Bedienungsanleitung Seite 11

Funk-thermometer

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
TFA_No. 30.3069_Anleitung
PRIO – Wireless Thermometer
• This product should only be used as described within these
instructions.
• Unauthorized repairs, alterations or changes to the product are
prohibited.
Caution!
Risk of injury!
• Keep these devices and the batteries out of reach of children.
• Batteries contain harmful acids and may be hazardous if swal-
lowed. If a battery is swallowed, this can lead to serious internal
burns and death within two hours. If you suspect a battery
could have been swallowed or otherwise caught in the body,
seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken
apart or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent
damage caused by leaking. Never use a combination of old and
new batteries together, nor batteries of different types.
• Wear chemical-resistant protective gloves and safety glasses
when handling leaking batteries.
Important information on product safety!
• Do not expose the devices to extreme temperatures, vibrations
or shocks.
• The outdoor transmitter is splashproof, but not watertight.
When placed outdoors, choose a dry place for the transmitter.
5. Elements
5.1 Base station (Receiver)
A: Display (Fig. 1):
A 1:
Outdoor temperature
20
21.04.2020
15:00 Uhr
Seite 11
PRIO – Wireless Thermometer
A 2:
Reception symbol for the transmitter
A 3:
Battery symbol for the transmitter
A 4:
Trend arrow
A 5:
Battery symbol for the base station
A 6:
Indoor humidity
A 7:
Indoor temperature
A 8:
Seconds or AM/PM
A 9:
Weekday and date
A 10: Time or alarm time
A 11: Alarm symbol
A 12: DCF reception symbol
A 13: Minimum value/lower alarm limit
A 14: Temperature alarm symbol
A 15: Maximum value/upper alarm limit
B: Buttons (Fig. 1 + 2):
B 1:
MAX/MIN button
B 2:
SET button
B 3:
TEMP ALARM button
B 4:
TIME ALARM button
B 5:
+ button
B 6:
– button
C: Housing (Fig. 2):
C 1:
Battery compartment
C 2:
Stand
5.2 Transmitter (Fig. 3):
D 1:
LED signal lamp
D 2:
TX button
D 3:
Battery compartment
D 4:
Mounting hole
21

Werbung

loading

Diese Anleitung auch für:

30.3069.01