Set up:
All connections of the device should be made before switching on. Only use high-quality cables
that are as short as possible for the connections.
Start:
After plugging the device into the power supply, the AQUARIUS is immediately in operation.
A selector switch is located on the rear panel. With this you can switch the rotation on or off. (- =
rotate / O = static)
Connections and controls:
No.
Designation
1
LED lens
2
Locking screw
3
Mounting bracket
4
Power Input
No.
Designation
5
Selector switch
6
Ring eye e.g. for Safety
7
Cooling
ENGLISH