Electrical Connection; Getting To Know Your Appliance - Bosch SKT 5102 Gebrauchsanweisung

Fresh water connection
Connect the fresh water connection to the
tap according to the installation instructions
with the enclosed parts. Ensure that the
fresh water connection is not kinked,
crushed or twisted. If the appliance is
replaced, always use a new water supply
hose for connection to the water supply; the
previous supply hose must not be re used.
Water pressure:
at least 0.3 bar (0.03 Mpa),
maximum 10 bar (1 Mpa).
Inlet rate:
minimum 10 litres/minute
Water temperature:
Preferably cold water. If the machine is
supplied with warm water, the maximum
permitted inlet temperature is 60 °C.

Electrical connection

Connect the appliance only to 230 V
alternating current via a correctly installed
socket with protective conductor. See rating
plate for required fusing
The socket must be attached near the
dishwasher and be freely accessible.
The connection may be modified by an
electrician only.
Use only a residual current operated
circuit breaker which features the
symbol. Only this circuit breaker guarantees
compliance with the currently valid
regulations.
.
20
Getting to know your
appliance
Diagrams of the control panel and the
interior of the appliance can be found in the
envelope at the front.
Individual positions are referred to in the text.
Fascia
Door Opener
1
Main switch (ON/OFF)
2
Programme selector
3
Start position for the individual
4
programme
Programme overview
5
Salt refill indicator
6
Appliance interior
Rating plate
20
Dispenser for salt
21
Spray arm
22
Filters
23
Dispenser for rinse aid
24
Detergent dispenser
25
Required accessories:
Salt for softening water
Detergent
Rinse aid
Use only those products which are suitable
for dishwashers.
en
27