Installation - Bosch SKT 5102 Gebrauchsanweisung

en
Attention
Remember: Repairs may be carried
out by a technician only.
If a component has to be replaced,
ensure that only original spare parts
are used. Improper repairs or use
of non original spare parts may
cause considerable damage and
put the user at considerable risk.
26

Installation

The dishwasher must be connected
correctly, otherwise it will not function
properly. The specifications for the inlet and
outlet as well as the electrical connected
loads must correspond with the required
criteria as specified in the following
paragraphs or in the installation instructions.
Delivery
Your dishwasher has been checked
thoroughly in the factory to ensure that it is in
working order. This may cause small water
stains. These will disappear after the first
wash cycle.
Installation
The required installation dimensions can be
found in the installation instructions. Ensure
that the appliance is situated securely on the
floor.
Waste water connection
The required work sequence can be found in
the installation instructions. If required,
fit a siphon with an drainage connection.
Connect the waste water hose to the
drainage connection of the siphon with the
enclosed parts.
Ensure that the drainage hose is not kinked,
crushed or twisted. Ensure that there is no
locked cover preventing drainage of the
waste water!