Troubleshooting; Technical Specifications - Kärcher Iron EasyFinish Bedienungsanleitung

Dry ironing
ATTENTION
Damage to the device
Water shortage in the steam boiler leads to damage to
the device.
Make sure that there is water in the steam boiler.
ATTENTION
Damage to garments
Failure to observe the ironing information in the garment
may result in damage.
Observe the ironing information in the garment.
Note
With the fixed, optimal temperature setting, all ironable
textiles can be ironed without additional temperature
setting.
Smooth delicate fabrics and imprints on the back with
steam without direct contact with the iron.
 Wait until the heating indicator light (orange) of the
iron goes out.
The iron is ready for ironing.

Troubleshooting

Often, failures have simple causes and you can do the
troubleshooting yourself using the following overview. If
you are in doubt or if the failure is not listed here please
contact the authorized customer service.
The steam pressure iron "spits" water.
 Rinse or descale boiler of steam cleaner.
After ironing breaks, water drops come out of the
steam pressure iron
During longer breaks from ironing, the steam in the
steam line can condense.
 Direct the first burst of steam at a separate piece of
cloth.

Technical specifications

Electrical connection
Voltage
Protective class
Performance data
Heating output
Subject to technical modifications!
8
No steam
220-240 V
1~50-60 Hz
I
700 W
– 3
EN