Tr Oubleshooting - USRobotics Wireless Ndx ADSL2+ Gateway Installationsanleitung

6. Select the manufacturer and model of your printer. Click
N o t e : If your printer is not in the list, your printer drivers were not installed
7. When prompted, select
8. Click
Step Four: Verify the Printer's Connectivity
1. Do one of the following:
2. Right-click on your printer and select
3. Click
N o t e : If the test page fails to print, see "Troubleshooting" in the User Guide

Tr oubleshooting

This basic procedure addresses a number of symptoms that you might experi-
ence with your gateway:
1. Verify the power cord and all the Ethernet cables are connected correctly.
2. Ensure that the power outlet to which the gateway is connected is a live out-
3. Refer to the LED descriptions in this guide and then check the LEDs on the
4. For wireless connections only: Low link quality or range can be caused by
5. For wireless connections only: Verify that each device connecting to the gate-
Downloaded from www.Manualslib.com
correctly. Repeat "Step One: Local Printer Installation" on page 9.
.
Finish
" Windows Vista: Click Windows
> .
Sound Printers
" Windows XP: Click Windows
" Windows 2000: Click Windows
. The test page should print successfully.
Print Test Page
on the USRobotics Installation CD-ROM for additional information.
This includes the cables connecting the gateway and all the computers in the
network. See the Installation illustrations on page 4.
let.
gateway to make sure you are receiving power and all ports are functioning.
See the LED descriptions on page 1.
environmental interference, such as lead-based paint and concrete walls, or
some electronic items, such as 2.4GHz phones. Try to move the antenna of
the gateway or reposition the wireless clients to improve the link quality.
way is set to Infrastructure mode. Set the Network name or SSID in the wire-
less adapter's settings to the
verify that you are using the same wireless security type. Refer to your wire-
less adapter's documentation to determine how to change these settings.
manuals search engine
to set this printer as your default printer.
Yes
>
Start Control Panel
>
Start Printers and Faxes
>
Start Settings
Properties
that is used in the gateway, and
Network name
.
OK
>
Hardware and
.
>
.
Printers
.
English
11