USRobotics Wireless Ndx ADSL2+ Gateway Installationsanleitung Seite 14

English
Step Three: Connect Computers to the Wireless USB Print Server
N o te : You must perform this procedure on each computer on your network
Windows Vista:
1. Click Windows
2. Click
3. Choose the radio button labeled
Click
4. Click
5. Choose
location address recorded during Step Two. Click
N o te : The URL information is case-sensitive and must be entered exactly as
6. If prompted, select the manufacturer and model of your printer and follow
the on-screen instructions.
7. Enter a name for the printer and click
page to verify the printer's connectivity.
8. Click
Windows XP and 2000:
1. Do one of the following:
" Windows XP: Click Windows
" Windows 2000: Click Windows
2. Click
3. Click
4. Select the radio button labeled
computer
5. Select
field, enter the
tion pages. Click
N o te : The URL information is case-sensitive and must be entered exactly as
10
Downloaded from www.Manualslib.com
to allow printing using the print server on the Wireless
Gateway.
>
Start Control Panel
The Add Printer Wizard will start.
Add a Printer.
Next
The Printer That I Want Isn't Listed
Select a shared printer by name
it is listed on the
Printer location
to complete the setup process.
Finish
The Add Printer Wizard will start.
Add a Printer.
.
Next
. Click .
Next
Connect to a printer on the Internet or on a home or office network
Printer location
.
Next
it is listed on the
Printer location
manuals search engine
>
Hardware and Sound
Add a network, wireless or Bluetooth printer
.
, and in the URL field, enter the printer
Next
section on the gateway's Status page.
. You can choose to print a test
Next
>
Start Printers and Faxes
>
Start Settings
A network printer, or a printer attached to another
address you copied from the gateway configura-
section on the gateway's Status page.
N
dx ADSL2+
> .
Printers
.
.
.
>
.
Printers
. In the URL