USRobotics Wireless Ndx ADSL2+ Gateway Installationsanleitung Seite 13

For instructions on printer installation for Windows Me and 98SE, Mac, and
Linux, see the User Guide on the USRobotics Installation CD-ROM.
Step One: Local Printer Installation
N o t e : If the printer has already been installed on every computer that will use
You need to install the drivers provided by the printer manufacturer on each
computer that will use the printer before connecting your printer to the Wireless
N
dx ADSL2+ Gateway.
1. Plug your USB printer into one of the USB ports on the computer.
2. Install the printer by following the installation instructions included with your
3. Print a test page to ensure that the printer is working properly.
4. Power off the printer.
Step Two: Get Your Print Server Information
1. Disconnect the printer from your computer and plug the thin rectangular end
2. Turn your printer on.
3. On your computer, start a Web browser.
4. In the location or address line type
5. Enter the user name and the password for your gateway and click
6. From the
7. Enter the
8. Write down the printer location address (example:
Downloaded from www.Manualslib.com
it on the network, skip to "Step Two: Get Your Print Server Informa-
tion" .
printer.
of the USB cable into the
USB
ADSL 1 2 3 4
Reset
access the gateway configuration pages.
menu, select
Device
and a
Printer name
). You need the address to set up the printer on computers that
ers/My_Printer
you want to have access to the printer.
manuals search engine
port on the Wireless
USB
Secure
15VDC
Easy
Setup
192.168.1.1
Printer Server.
for the printer.
Comment
English
N
dx ADSL2+ Gateway.
and press ENTER to
.
OK
http://192.168.1.1:1631/print-
9