Herunterladen Inhalt Inhalt Diese Seite drucken

Marta MT-4313 Bedienungsanleitung Seite 37

Inhaltsverzeichnis

Werbung

MT-4313
Press the button
,
begins flashing by the
symbol. It means you entered into edit mode of the first phase. Press
; the minutes indicator will begin
flashing on the display. Set the target value by turning the knob
. Pitch – 1 minute. Press
again; the hours indicator will begin to flash. Set the target value by
turning the knob
. Pitch – 1 hour. Then press
and set the target value of the cooking temperature by turning the knob
. Pitch - 1°C. Press the
button
to confirm the settings of the first phase in the SMART program. Set the cooking time/temperature settings of as many phases as you need in the same
manner as described above for up to nine phases. Press and hold the button
for 2 seconds to start the SMART program. It will execute as many phases as
programmed. Phases which have a zero value of cooking time will not start. All customized settings will be stored in the memory for future use. The user may also adjust
cooking settings of any phase before the start of the SMART cooking cycle but those changes will not be saved in the memory.
ATTENTION! Check how many phases have been programmed earlier! If, for example, three phases were used last time but only two are needed now,
please do not forget to set the value at zero cooking time for the third phase. This can be done by entering into edit mode of the third phase and resetting the
cooking time to 00:00 in the manner described above.
«MULTICOOKER»
Choose Multicooker by turning the knob
. The Multicooker icon
will light up and the display will show the program‟s default settings: (10 minutes / 30°C).
Press
; the minute indicator will begin flashing on the display. Set the target value by turning the knob
. Pitch – 1 min. Press
again; the hour indicator will
begin flashing. Set the target value by turning the knob
. Pitch – 1 hour. Press
to edit the cooking temperature. Set the target value by turning the
knob
. Pitch – 1°C. Press and hold the button
for 2 seconds to start the Multicooker program with your customized settings.
37
Downloaded from
www.Manualslib.com
manuals search engine

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis