Displays On The Remote - FAZUA Evation Kurzanleitung

Displays on the remote

→ The display on the remote consists of 11 LEDs (for Remote b) or 5 LEDs (for
Remote fX and Remote bX).
C
Remote
On Remote b, you will find 11 LEDs:
• The bottom 10 LEDs C5 serve as an indicator for the charge level
and the pedal support level set.
• The upper LED serves as a status indicator C4 , informing you of
the status of your e-bike.
C
Remote fX
On Remote fX or Remote bX, you will find 5 LEDs:
• All five LEDs together C5 serve as a display for the charge level
and the pedal support level set.
• The upper of the five LEDs C4 also serves as a status indicator,
providing information on the status of your e-bike.
Status display C4
The status display C4 indicates a status change or an existing fault.
If no fault is detected:
• the LED of the status display C4 does not light up (Remote b).
or
• the LED of the status display C4 functions as one of the five LEDs
to display the charge level or the support level set C5 (Remote fX
and Remote bX).
"STATUS DISPLAY" OVERVIEW TABLE
C4
lit/flashing:
white*
green
yellow
red
* Only applies for Remote fX and Remote bX.
14
C
and Remote bX
Meaning
Battery flat
Drive system ready for operation
"Soft Fault"; possible to carry on riding, but not advisable
"Hard Fault"; not possible to carry on riding/maintenance
required
evation |