Installing The Measuring System - PCE Instruments PCE-4 EKIT Serie Bedienungsanleitung

Carrying handle
Charger port
Microphone connector
Mains power
Handle
6

Installing the measuring system

First unfold the tripod. Then guide the measurement signal cable through the microphone holder.
Now connect the microphone to the measurement signal cable and screw the microphone onto
its holder. Then screw the microphone holder onto the tripod.
Use the measurement signal input to connect the measurement signal cable to the measuring
case. Finally connect the measuring cable and the power supply cable to your sound level meter
in the case.
Note:
Always ensure vertical position of the microphone. Otherwise, damage through weathering may
occur.
© PCE Instruments
9