Fermax DUOX PLUS CITYLINE VEO XS WIFI Schnellstartanleitung Seite 16

F2
WiFi signal strength icons displayed in the menu:
Between 0% and 20%
or monitor not paired.
Auto-on
Note: This section goes through the most basic steps in quick commissioning. For more information,
please download the DUOX PLUS Blue mobile application manual, code: 970156 at www.fermax.com.
8
DUOX PLUS WIFI VEO XS VIDEO KIT
11
If the WiFi network and credentials provided are correct, the monitor
will connect to the Internet and the process will have been completed
successfully.
12
The application will show the new linked house as available and connected
(green tick ) and the monitor will show that connection was successful.
The white WiFi led will stay now stay on.
Monitor
confirmation message.
13
Once connected, the WiFi signal strength will appear in the bottom
right of the monitor user menu.
Between
20% – 40%
An error message will ap-
pairing process
pear in the monitor pairing
processif there is a problem.
Between Between
40% – 60% 60% – 80%
14
To test the call divert function, the
user can select auto-on and see
whether it connects to the outdoor
panel, (as long as it is not in use).
User parameter settings:
USER RESET :
A user reset returns the status of the
monitor to unpaired (disconnected
from the Internet).
ERROR
Between
80% – 100%