Installing The Enclosure - Weidmuller Klippon K Montagerichtlinien

Installing the enclosure

The enclosures are fitted with mounting holes that are located outside of the sealed area.
These can be used for wall mounting. For the smaller enclosure up to Klippon
have 2 mounting holes, for the larger versions there are 4 mounting holes.
Consult the following table for the spacing and exact geometry of the mounting holes.
The dimensions (in mm) for the enclosure installation have been cast into the back side
of the enclosure. ("mm" and "inch")
Mounting feet are available as an accessory for wall mounting.
For outside installation we recommend to work with helicoil inserts. The Helicoil can be
manufactured by the CSS departments.
8
A
C
K32 we
®
E