Team RC 8 Gebrauchsanleitung Seite 9

Fax +32 2 359 95 50

Never block the safety device of the appliance.

The processor bowl can simply be washed under running water.

Be careful not to hurt yourself when handling, removing, cleaning or emptying the bowl.

Competent qualified electrician: after-sales department of the producer or importer or any
(*)
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In case of need you should return the appliance to this electrician.
IMPORTANT INFORMATION
This appliance is not intended for professional use. You should follow the requested breaks.
Failure to follow this instruction carefully may result in damage to the motor. Please refer to the
rating label for the maximum continuous usage time (KB xx min where xx is the maximum usage
time). The breaks should last at least 10 minutes.
BE CAREFUL!
1) Your appliance is fitted with a security device on the pouring jug allowing the
functioning of the appliance only when the jug and its lid are correctly placed on the
motor base. If those conditions are met and the appliance does not start, call your
after sales service.
2) Your appliance is also fitted with a security device on the lid. If the lid is not fitted
correctly, the appliance won't start.
USE
Make sure the appliance is unplugged and the ON/OFF & speed switch is in position "0".
 Place the processor bowl onto the shaft and make sure that the three lugs at the bottom
of the bowl fit into the three small slots of the base and turn the bowl clockwise until it
clicks into place.
 Make sure the bowl is well fitted, because otherwise the appliance will not work.
 Depending on the desired preparation, you will have to use various accessories. For more
details, please check the instructions below.
 Place the lid with feeding tube on the bowl in such a way that the arrow  on the lid is
slightly to the right of the handle of the bowl and turn it clockwise until the arrow on the lid
ends up right above the middle part of the handle of the bowl. Caution: as long as the lid
is not locked properly, the appliance will not work.
 Plug in the appliance.
 Turn the ON/OFF & speed switch up to speed 1 or 2 depending on the preparation.
 If you wish to use the appliance punctually, turn the ON/OFF & speed switch to position
"P" ("pulse") for one or two seconds. Do not use the pulse function for a longer time. When
you let the switch go, it will switch back to "0" automatically. The pulse function is perfect
for making milkshakes.
FUNCTIONS
a) Chopping
 Make sure that the appliance is unplugged and that the ON/OFF & speed switch is in "0"
position.
 Place the processor bowl onto the shaft and make sure that the three lugs at the bottom
of the bowl fit into the three small slots of the base and turn the bowl clockwise until it
clicks into place.
 Place the blade support with the chopping blade onto the shaft.
Copies of the I/B. Please reproduce them without any
changes except under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
9
Assembly page 9/32
special instruction from
TEAM RC 8 - 100713
Team