Herunterladen Inhalt Inhalt Diese Seite drucken

Whispbar K422W Montageanleitung Seite 4

Basisträgersystem
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
EN
Fitting Kit
K422W
Use hex screwdriver to reverse adjusting
screw 10 turns.
Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
Ensure each end of the crossbar is
adjusted equally.
Set bars to length (revert to rear of these
instructions).
Clamps onto flush roof rail. Pins locate on
inside of rail.
Please check the rear of this manual for
information relating specifically to your
vehicle.
4

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis