Herunterladen Inhalt Inhalt Diese Seite drucken

WOLFF FRÄSMASTER 18V Originalbetriebsanleitung Seite 40

Fugenfräse
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Charger and battery
Observe the general power tool safety warnings – Battery tool use and care in Chapter 1 [4].
Do not expose the charger to rain or wet conditions. Water entering a charger will increase the
risk of electric shock.
The unit is only suitable for indoor use (inside rooms).
Read the operating instructions
(specific information can be found in the associated manuals for the charger and battery), website
link: http://webcatalog.wolff-tools.com
4
3
2
The 18.0 V charger is intended for charging lithium-ion batteries of the following type: 18.0 V (5.0 Ah) battery
pack.
How to ensure a long battery life and store batteries correctly
WARNING
-
Never charge batteries at temperatures below 0°C or above 50°C.
-
Do not charge batteries in environments with high levels of humidity or high ambient
temperatures.
-
Do not cover the batteries or charger during the charging operation.
-
Unplug the charger from the power outlet once charging has commenced.
The battery is only to be stored in dry environments that are protected against dust. If
-
batteries are not going to be used for some time, they should be stored somewhere cool
in a partially charged state.
The battery and charger heat up during charging. This is normal.
Lithium-ion batteries do not suffer from the memory effect. Nevertheless, a battery should be completely
discharged before charging and the charging process should always be fully completed.
40
5
1
Battery slot
Contacts
Ventilation slots
Display for indicating operating status
Power cord plus power plug

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis