Restoring Default Settings - Nowy Styl eModel 2.0 Bedienungsanleitung

2.6 Restoring default settings
To restore the workstation to default settings, perform the following steps:
1. Press and hold the "logo" button for approx. 5 seconds
2.
Use the "down" or "up" buttons to select option
3. Confirm the selection by pressing the "logo" button again
The symbol will be shown on the display
4. Press the "logo" button again
Default settings have been restored. The
Finish by performing system Initialisation/First start-up – see page 8.
12 EN
from the menu
symbol will be shown on the display.