Color; Advance - Grundig GML-2810U Bedienungsanleitung

)
Phase (0-100 :
Adjust the frequency of the input signal to match that of the display.
)
Sharpness (0-4 :
Increase or decrease the boundaries between light and dark areas.
9.5. Colour
In the Colour menu you can adjust all the settings that are connected to the colour settings of
the input source. Press the "UP" or "DOWN" button to select the menu you want to adjust.
Press the "MENU" button to select the submenu. And change the value with the "UP" or
"DOWN" buttons. Press the "EXIT" button to go back to the Submenu selection.
Temperature (sRGB, User, 9300, 6500, 5800)
Adjust the spectrum on the display. Higher values are more blue (clear sky) while lower
numbers are more red (candle flame).
Color Effect (Standard, Game, Movie, Photo, FPS, RTS):
Preset the image effects. Use this to toggle changes to the image rendering without making
any additional adjustments.
Gamma (Off, 1.8, 2.0, 2.2, 2.4):
Adjust the luminance of the image. Higher luminance will be whiter and lower luminance will be
darker.
)
Hue (0-100 :
Adjust the colour in the image.
)
Saturation (0-100 :
Adjust the amount of grey in the image. Less saturation is more grey. High saturation is less
grey. High saturation will result in a deeper colour.
Low Bluelight (Off, On):
Adjust the level to help relieve any eye strain.

9.6. Advance

In the Advance menu you can adjust some advanced settings that are connected to the source
information and special functions. Press the "UP" or "DOWN" button to select the menu you
want to adjust. Press the "MENU" button to select the submenu. And change the value with the
"UP" or "DOWN" buttons. Press the "EXIT" button to go back to the Submenu selection.
9