Input - Grundig GML-2810U Bedienungsanleitung

DP Option (1.2, 1.1):
Change the DisplayPort configuration.
Aspect Ratio (Full, 16:9, 4:3, 5:4, 1:1):
Change the ratio of the image on the display regardless of incoming signal.
DDCCI (Off, On):
Display Data Channel / Command Interface. Enable this to allow a computer to send
commands to the display.
DP EDID (4K2K@60Hz, 1080P, 2560x1440, 4K2K@30Hz ):
DisplayPort Extended Display Identification Data. Changes the "kind" of monitor information
displayed to a computer.
Ultra Vivid (Off, L, M, H):
Change the intensity of the image.
OD (Off, On):
This function means Overdrive. Enable this setting to adjust any apparent motion blurring.

9.7. Input

In the Input menu you can select the source of the video input. Press the "UP" or "DOWN"
button to select the source. Press the "MENU" button to select the source. Press the "EXIT"
button to go back to the Submenu selection.
Auto Select:
Auto Select will choose one input with a valid input signal. The order of the Input is as following
(1. DP, 2. HDMI1, 3. HDMI2, 4.DVI). *D stands for Digital Signal. The order cannot be changed.
D0 DP:
Manually select the DisplayPort as an input source.
D1 HDMI1:
Manually select the first HDMI port as an input source.
D2 HDMI2:
Manually select the second HDMI port as an input source.
D3 DVI:
Manually select the DVI port as an input source.
10