Rear View With Connections; Turning The Monitor Off/On - Grundig GML-2810U Bedienungsanleitung

4. Rear View with Connections

Power: Connect the power cord which is included in the package.
DVI: Connect the monitor to a video source with the DVI connection
HDMI1 & HDMI2 (High Definition Multimedia Input): Here you can connect a monitor with
a HDMI cable (the cable is not included in the package).
NOTE: HDMI includes not only the image transfer but also the ability to transmit audio.
DP: Connect the monitor to a video source with DisplayPort connection. The monitor supports
up to 3840x2160 pixel over DisplayPort.
Audio In: Please use the RCA connector cables to transmit audio signals to the monitor.
Audio Out: Please use the RCA connector cables to transmit audio signals to an external
speaker or headphone.

5. Turning the Monitor Off/On

PLEASE NOTE:
After pressing the "POWER" button, it will take approximately 6 sec. until the monitor is
ready and the display is visible.
These are the various power states of the LED monitor represented by the different LED
colours on the POWER button:
GREEN: On
RED: No signal input
BLANK: Off or No power supply
Power DVI, HDMI2, HDMI1, DP, Audio In, Audio Out
6