Denon TU-201SA Bedienungsanleitung Seite 9

(3) Tuning in Preset Stations
Example: To tune in the station stored at preset
number "3"
ON / STANDBY TIMER
MHz
TUNED STEREO AUTO
Press the PRESET UP
button three times to display
"P3".
1
Be sure that the UP/DOWN buttons function
as the PRESET UP/DOWN buttons before
proceeding with step 1.
Preset stations can also be called out using the
preset buttons (PRESET UP and DOWN) after a
preset number is called out.
Example:
After calling out "P3", press the PRESET UP button
to call out "P4", the PRESET DOWN button to call
out "P2".
(4) Using the RDS functions
TU-201SA
(this unit)
ON / STANDBY TIMER
MHz
TUNED STEREO AUTO
CALL
RC-906
4 5 6
(system remote
CLEAR
control unit) 7 8 9
RANDOM REPEAT
10 +10
CD SRS
CD-R TAPE MD TIME EDIT
REV. TIME/
Dolby NR DIMMER
MODE PANEL
2,5,9
RDS BAND TUNING
1
STOP PLAY VOLUME
/SELECT
PRESET
+
6
-
TAPE
SLEEP FUNCTION MODE
Downloaded from www.Manualslib.com
When the TU-201SA is connected in a system with
the 201SA series, this operation can also be
performed on the system remote control unit (RC-
906) included with the pre-main amplifier (PMA-
1
201SA).
When operating with the
system remote control unit,
PRESET / TUNING
DOWN UP
first set the remote control
BAND / RDS MEMORY / SET unit's function selector switch
to "TUNER".
CH
AM-FM STEREO TUNER TU-201SA
Procedure:
• Instead of pressing e, the preset
channel can also be called out by
PRESET / TUNING
pressing the < or > button to display
DOWN UP
"P3".
• To call the station at a different preset number, use
the number buttons and the +10 button on the
system remote control unit (RC-906) to set the
desired preset number.
Examples:
To call the station at preset number 12:
Press +10 , 2
To call the station at preset number 29:
Press +10 , +10 , 9
Receiving RDS broadcasts (FM only)
Press the BAND/RDS button and set
the FM AUTO.
3, 7,10
Press the BAND button on the
1
PRESET / TUNING
DOWN UP
remote control unit and set the FM
BAND / RDS MEMORY / SET AUTO.
CH
AM-FM STEREO TUNER TU-201SA
1, 2, 5, 6
9
Press the BAND/RDS button for at
least 3 seconds.
Press the RDS button on the remote
2 control unit.
12
3,7,10
Flashes
manuals search engine
Press the PRESET/TUNING
UP or DOWN button.
CD
Press the TUNING
TUNER
MD
3 button on the remote control
CD-R
TAPE
unit.
(RC-906)
3
Flashes
The station is tuned in.
4
"RDS" lights after 5 seconds of flashing.
Once the station is tuned in, "RDS" flashes for
5 seconds and program service name is
displayed.
NOTE: • If no RDS station is found, " NO PROG " is
displayed.
BAND/RDS
BAND
BAND/RDS
RDS
PTY Search
PRESET / TUNING
DOWN UP
Press the BAND/RDS button for at
least 3 seconds. Then press the
BAND/RDS button once.
TUNING
or
• ª
Press the RDS button twice on the
remote control unit.
5
Flashes
("PTY" and "RDS" flash, and ", PTY /" is
displayed.)
Press the MEMORY/SET button
to select the type of program.
Station name
Press the PRESET < or >
button on the remote control
unit to select the type of
program.
6 (One of the 29 types listed
below can be selected.)
Flashes
Press the PRESET/TUNING
UP or DOWN button.
7
Press the TUNING
button on the remote control
unit.
The station is tuned in.
8
"PTY" and "RDS" light after 5 seconds of flashing.
Once the station is tuned in, "RDS" and "PTY"
flash for 5 seconds and the program service
name is displayed.
NOTE: I f n o p r o g r a m o f t h e s p e c i f i e d t y p e i s
found," NO PROG " is displayed.
ENGLISH
BAND/RDS
RDS
MEMORY / SET
PRESET
+
-
PRESET / TUNING
DOWN UP
TUNING
or
• ª
Station name
9