Denon TU-201SA Bedienungsanleitung Seite 11

(3) Setting the Timer
The timer function lets you switch the power between
2
the on and standby modes automatically at the desired
times.
When connected in a system with the 201SA series,
2
the timer can be used to play a CD, cassette or MD or
to record from the tuner onto the MD recorder or
cassette deck ("air check").
Example: Using the everyday timer to listen to the
station stored at preset number 3 (FM 98.00 MHz)
from 12:35 to 12:56
3,5,7,9,11,13,15,17
ON / STANDBY TIMER
MHz
TUNED STEREO AUTO
1,18 2 4,6,8,10,12,14,16
1
Turn on the power.
Press the TIMER button for at least
3 seconds.
• "EVERYDAY" is displayed.
2
If the time is not set, "TIME" is displayed.
Perform steps 3 to 7 on page 10, then start
the timer setting over.
Press one of the
PRESET/TUNING buttons
3
to display "EVERYDAY" or
"ONCE".
Press the MEMORY/SET button.
• This sets the unit to the timer
setting mode's function
setting mode.
4
Example: When the everyday timer is
selected
Downloaded from www.Manualslib.com
Use the PRESET/TUNING
buttons to switch the
function to "TUNER".
5
The function switches as follows each time
the button is pressed:
PRESET / TUNING
DOWN UP
: When the TUNING UP button is pressed.
BAND / RDS MEMORY / SET
: When the TUNING DOWN button is
pressed.
CH
AM-FM STEREO TUNER TU-201SA
Press the MEMORY/SET button.
6
• "TUNER" is stored in the
memory as the timer function.
ON / STANDBY
Use the PRESET/TUNING
buttons to set preset
number 3.
7
TIMER
Press the MEMORY/SET
button.
• The preset station is stored in
the memory and the timer on
PRESET / TUNING
time setting mode is set.
8
DOWN UP
MEMORY / SET
Setting the PRESET/TUNING
on time
Use the tuning buttons to set
the hours position to "12".
9
manuals search engine
PRESET / TUNING
Press the MEMORY/SET button.
DOWN UP
• "12" is stored in the memory
for the hours position.
10
Use the PRESET/TUNING
buttons to set the minutes
position to "35".
11
MEMORY / SET
Press the MEMORY/SET button.
• The on time is stored in the
memory and the timer off time
setting mode is set.
12
PRESET / TUNING
DOWN UP
Setting the timer off time
Use the PRESET/TUNING
buttons to set the hours
position to "12".
13
MEMORY / SET
Press the MEMORY/SET button.
• "12" is stored in the memory
for the hours position.
14
PRESET / TUNING
DOWN UP
Use the PRESET/TUNING
buttons to set the minutes
position to "56".
15
MEMORY / SET
Press the MEMORY/SET button.
16
• The off time is stored in the
memory.
Use the PRESET/TUNING
Button to select "E oN".
• The " " mark lights.
17
PRESET / TUNING
DOWN UP
Turn off the power.
When the TU-201SA is
connected in a system with
the 201SA series, press the
18
power button on the tuner.)
• The standby mode is set.
(The power switch indicator
MEMORY / SET
turn orange and display turn
off.)
Turning on and off the timer standby ON/OFF
• In TIMER STANDBY mode, each time the
PRESET/TUNING button is pressed, the setting
changes as follows:
PRESET / TUNING
1 oN/E oN: Both once and everyday timers
1
DOWN UP
are activated. (The
lights.)
1_ _/E oN: Only the everyday timer is
activated. (The
1 oN/E_ _: Only the once timer is activated.
(The mark lights.)
1_ _/E_ _: Both timers are canceled. (The
1
MEMORY / SET
mark turns off.)
• When you set only the everyday timer, the
indication changes between 1_ _/E_ _ and 1_ _/E
oN.
• When you set only the once timer, the indication
changes between 1_ _/E_ _ and 1 oN/E_ _.
• When you complete the setting, the display
automatically returns to the former state after 5
seconds.
PRESET / TUNING
• To change the settings of TIMER STANDBY, press
DOWN UP
TIMER button to set the unit in TIMER STANDBY
mode first, the use PRESET/TUNING button to
make changes.
ENGLISH
MEMORY / SET
PRESET / TUNING
DOWN UP
ON / STANDBY
mark
mark lights.)
11