Using The Timer - Denon TU-201SA Bedienungsanleitung

ENGLISH
Programs
(News)
(Affairs)
(Information)
(Sport)
(Education)
(Drama)
(Culture)
(Science)
(Varied)
(Pop Music)
(Rock Music)
(Easy Listening)
(Light Classics)
(Serious Classics)
(Other Music)
TP Search
Press the BAND/RDS button for at
least 3 seconds.
The press the BAND/RDS button
twice.
Press the RDS button 3 times on
9
the remote control unit.
Flashes
Press the PRESET/TUNING
UP or DOWN button.
Press the TUNING or
• ª
10
button on the remote
control unit.
Flashes
The station is tuned in.
11
"TP" and "RDS" light after 5 seconds of flashing.
Once the station is tuned in, "TP" and "RDS"
light and program service name is displayed.
NOTE: " NO PROG " is displayed when there is
traffic information broadcast station.
10
Downloaded from www.Manualslib.com
(Weather & Meteorological)
(Finance)
(Children's Progs)
(Social Affairs)
(Religion)
(Phone In)
(Travel & Touring)
(Leisure & Hobby)
(Jazz Music)
(Country Music)
(National Music)
(Oldies Music)
(Folk Music)
(Documentary)
RT (Radio Text)
(This operation is only possible from the remote
BAND/RDS
control unit RC-906)
To turn the RT mode on, press the
PANEL button on the remote control
RDS
unit until the RT indicator is lit. (Refer
to page 13)
When the station currently tuned in is
offering a radio text message service,
12
the message scrolls on the display.
PRESET / TUNING
DOWN UP
• When the RT mode is turned on while an RDS radio
station not offering an RT service is tuned in, " NO
T E X T " flashes on the display, then the mode
TUNING
automatically switches to the PS mode.
• In the same way, the mode automatically switches to
the PS mode when the RT service is finished. In this
case, the mode automatically switches from the PS
mode back to the RT mode when an RT broadcast is
resumed.
• The RT mode cannot be set in the AM band or FM
stations not offering RDS broadcasts.
• To turn the RT mode off, press the PANEL button and
switch to the desired display mode.
NOTE:
The PANEL function can only be operated with the
remote control unit (RC-906) included with the pre-
main amplifier (PMA-201SA) when connected in a
system with the pre-main amplifier (PMA-201SA).
(Refer to "System Remote Control" on page 13.)
manuals search engine
7

USING THE TIMER

(1) Setting the Current Time (24-hour display)
Example: Setting the current time to 19:30
ON / STANDBY TIMER
MHz
TUNED STEREO AUTO
1 2
1
Turn on the power.
TIME/
PANEL
Press the TIMER button for at least
3 seconds.
• "TIME" is displayed.
If the time is already set,
2
"EVERYDAY" is displayed.
Press one of the PRESET/TUNING
buttons to display "TIME", then
perform step 3.
Press the MEMORY/SET button.
• The hours position flashes.
3
(2) Before Setting the Timer
Be sure to set the current time. If the current time is not set, the timer standby indicator ("
2
timer will not function.
Be sure to preset the station before setting the timer. (Refer to "Presetting AM and FM stations" on page 8.)
2
The TU-201SA is equipped with two types of timers: the everyday time which turns the power on and off at the
2
same times every day, and the once timer that turns the power on and off only once.
Do not change the timer standby mode after the timer is activated (after the timer on time is reached). The timer may
2
not operate properly.
It is not possible to set the timer start and end times to the same time.
2
If the display or operation is not normal, unplug the power cord, then plug it back in while pressing the memory/set
2
button (MEMORY/SET). This restores the tuner to the initial default values. After doing this, reset the presettings,
current time and timer settings.
When setting the timer to operate the CD player or cassette deck, do so with a disc or cassette loaded and the disc
2
holder or cassette holder closed. The timer will not operate properly if no disc or cassette is loaded or if the disc
holder or cassette holder is open.
Use the PRESET/TUNING
buttons to input the hours
(19).
• "19" flashes in the hours
4 position.
4,6
PRESET / TUNING
DOWN UP
Press the MEMORY/SET button.
BAND / RDS MEMORY / SET
• "19" stops flashing, remaining
lit, and the minutes position
CH
starts flashing.
AM-FM STEREO TUNER TU-201SA
5
3,5,7
Use the PRESET/TUNING
buttons to input
ON / STANDBY
minutes (30).
• "30" flashes in
6
minutes position.
TIMER
Press the MEMORY/SET button
at the sound of the chime of a
time service, etc.
• "30" stops flashing, remaining
lit, and the current time is
7
displayed.
MEMORY / SET
The number changes continuously when one of the
tuning buttons (TUNING UP or DOWN) is pressed.
If the time is already set when step 2 is performed,
both the hours and minutes positions flash.
PRESET / TUNING
DOWN UP
MEMORY / SET
PRESET / TUNING
DOWN UP
the
the
MEMORY / SET
") will not light and the