Set The Scale To Zero; Tare Function; Switching Off The Scales - ADE KE 1602 Blanca Bedienungsanleitung

Operation
4. If you want to weigh something in a container, now place the container without
anything in it onto the weighing surface. Otherwise, proceed as described in
point 6.
5. Press ZERO/MODE. The display shows "0".
6. Put the substance to be weighed in the container or place it on the weighing
surface. The measured weight is shown on the display.
7. Read off the measured weight and remove the item or substance from the
container or the weighing surface.

Set the scale to zero

If values are still shown on the display, even if the weighing platform is empty (e.g. if
the scale is not optimal or TARE value is still displayed, see next section), you must set
the scale to zero.
− Briefly press ZERO/MODE 1x.
If the scale is correctly set to zero,

TARE Function

This function is practical, for example, when baking, if you would like to add another
ingredient to the ingredients already on the scales.
1. Press ZERO/MODE in order to set the scales back to "0".
− If the weight on the weighing platform is less than 200 grams,
(zero function).
− If the weight on the weighing platform is greater than 200 grams,
displayed (tare function).
2. Add the new substance. The weight of the added substance is shown on the display.
3. Repeat the process whenever you want to add more ingredients. The process can
be repeated as often as needed until the capacity limit (5 kg) is reached.

Switching off the scales

If the scale is no longer used, it automatically switches off in two stages:
‚ After approx. 15 seconds, the display light switches off.
‚ After approx. 2 minutes, the scale switches off completely.
18
also appears on the display.
is displayed
is
Kitchen Scales KE 1602