HERKULES DS 150/200 Bedienungsanleitung Seite 10

Anleitung_DS_150_200_SPK7:Anleitung BNTS 150-200 SP#1CFA8
GB
General instructions concerning safety
and accident prevention
To work safely with this machine and to prevent
accidents it is imperative to read the following safety
and operating instructions in full and to put all the
information into practice.
IMPORTANT! The following basic safety actions
must be taken when using electric tools to protect the
user from electric shocks and the risk of injury and
fire. Read all the following information before you use
this electric tool and keep these safety instructions in
a safe place.
Provide good lighting in the working area.
Guard against electric shock. Avoid bodily
contact with earthed parts (e.g. pipes, radiators,
cookers and refrigerators).
Keep other persons away. Do not allow other
persons (particularly children) to touch the
electric tool or the extension cable. Keep other
persons away from your work area.
Keep unused electric tools in a safe place.
Unused electric tools should be kept in a dry,
high or locked place.
Do not overload your electric tool. It will work
better and safer when used within its quoted
capacity range.
Use the right electric tool. Do not use any low-
powered machines for heavy duty work. Never
use the electric tool for purposes other than that
for which it is designed. For example, do not use
a hand-held circular saw to lop off branches or
cut down trees.
Rubber gloves and non-slip shoes are
recommended when working outdoors.
Also use a dust mask when working on dusty
jobs.
Follow the instructions for changing mounted
tools.
Check your extension cables regularly and
replace them if damaged.
Keep handles dry, clean and free from oil and
grease.
Always remove keys and wrenches after use.
Before switching on the electric tool, make sure
that all keys and wrenches have been removed
from the tool.
When using an extension cable outdoors. When
working outdoors, use only extension cables that
are approved for outdoor use.
Be alert at all times. Concentrate on what you are
doing. Use common sense when working. Never
10
use the electric tool when you are distracted.
The electric tool must never be used without the
PRCD supplied with it.
Always check the machine, the power cable and
the plug before use. Only ever use the machine if
it is in perfect, undamaged condition. Damaged
parts are to be repaired or replaced immediately
by a qualified electrician.
Always pull the plug out of the power socket
before carrying out any work on the machine,
before changing the grinding tool and in periods
of non-use.
Always run the power cable away from the back
of the machine to guard it from damage.
Keep the machine in a safe place and out of the
reach of children.
It is prohibited to use the machine
on asbestos materials.
Please note the accident prevention regulations
in force in your country.
Use only original spare parts.
Repairs are to be carried out by qualified
electricians only.
The level of noise at the workplace may exceed
85 dB(A). In this case you will need to introduce
noise protection measures for the user. The
noise produced by this electric tool is measured
in accordance with IEC 59 CO 11, IEC 704, DIN
45635 Part 21, NFS 31-031 (84/537/EEC).
Make sure of your footing. Avoid abnormal
working positions.
Keep electric tools out of the rain. Never use
electric tools in wet or damp conditions, and
never use them near inflammable liquids.
Keep the power cable safe from damage. Oil,
solvent and sharp edges can damage cables.
Keep your workplace tidy.
Make sure the power switch is off before
inserting the plug in the socket.
Wear suitable clothing. Never wear loose-fitting
clothes or jewelry. Use a hair-net on long hair.
For your own safety, use only the manufacturerʼs
accessories and attachments.
Always wear safety goggles, safety gloves and
ear-protectors on grinding, brushing and cutting
jobs.
Check that the speed marked on the grinding
wheel is the same as or higher than the grinderʼs
rated speed.
Make sure that the dimensions of the grinding
wheel are suitable for the grinder.
It is essential to store and handle grinding wheels
11.11.2008 10:18 Uhr Seite 10