Intended Use - KLIM Ai-1 Benutzerhandbuch

BACK PROTECTOR USE INSTRUCTIONS
The IMP Moto back protector was designed especially for
motorcyclists.

1 INTENDED USE

The IMP Moto back protector was designed to be used uniquely
on motorbikes. Do not use for any other application (skiing,
skating, horseback riding, cycling, etc.) The back protector
protects against impacts with the ground or an obstacle
during an accident. It may reduce injury severity (contusions
or fractures). No product or protection system can offer total
protection against injuries or damages to an individual or an
asset in the event of fall, collision, impact, loss of control, or
other. Likewise, this back protector may not totally prevent
injuries to the spinal column. The back protector does not offer
protection against the risks of perforation, cut or penetration
of an object. Use of this product must not encourage exceeding
any limits or taking additional risks.
2 SIZING SELECTION
Refer to the table below to choose your size:
Back protector
Waist-shoulder
length
Selecting a protector that is too large may lead to a risk of
interference with the helmet, causing dangerous driving
conditions.
3 Fit instructions
The IMP moto back protector must be correctly fitted and worn,
in order to effectively protect the protection areas. To obtain
optimum protection and comfort, please select the right size
and ensure that the airbag product is fitted correctly to your
body. Close all of the closures (zip closures), and other straps
for maximum comfort.
20 ENGLISH
S
35-40 cm
M
41-46cm
L/XL/2XL
47-52cm