Screen Mirroring (Ios) - Kodak LUMA 350 Schnellstartanleitung

SCREEN MIRRORING (ANDROID/WINDOWS - MIRACAST®)
4. Select the projector from the list of devices and select Connect.
A dialog box will pop up on the projector screen for you to confirm the
connection; use the arrows or the remote to highlight Accept and press
the confirm button.
5. Your screen will now be mirrored to the projector.
6. When finished, select Disconnect on your device.

SCREEN MIRRORING (iOS)

1. From the projector home screen, select Source, select Screen Mirroring,
and then select AirPlay. The name of the projector will be displayed on the
screen so that you can accurately identify it when attempting to connect.
2. Make sure your device is connected to the same network as your projector.
3. Activate the screen mirroring software on your device.
a. To activate screen mirroring on your iOS device:
4. Select the projector from the list of devices and select Connect. A dialog
box will pop up on the projector screen for you to confirm the connection; use
the arrows or the remote to highlight "Accept" and press the confirm button.
5. Your screen will now be mirrored to the projector.
6. When finished, select Disconnect on your device.
i. Swipe down to reveal the Control Center and tap the
Screen Mirroring button.
13 | EN