Connecting To An External Device - Kodak LUMA 350 Schnellstartanleitung

CONNECTING TO AN EXTERNAL DEVICE

To access photos or videos stored on any USB drive, insert the drive into the
corresponding port on the side, then navigate to Source > File Browser. If you're
using an HDMI compatible device, connect an HDMI cable from the device to
your projector to access and view images and pictures. An HDMI-to-HDMI cable
is included. If your device requires an adapter, you will need to purchase it
separately. For audio devices or headphones, there is an AUDIO OUT jack on
the left side.
NOTE: If you connect an HDMI device as well as a USB drive, the HDMI device
will take precedence over the USB drive and you will need to disconnect it to
access the other connected sources.
EN | 10