AC Schnitzer 5111 290 330 Montageanleitung Seite 34

F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter M5 (F90)
Fitting...
Fig. 34
Refit middle part of underfloor panelling and screw to
the spacer sleeves 30x20mm previously fitted using
the fixing bolts 5x70mm supplied.
Fig. 35
Drill a 5.5mm hole through each of the existing holes in
the AC Schnitzer front splitter.
Warning:
Only drill into the lower side of the AC Schnitzer
front spoiler element.
Do not drill through completely.
Fig. 36
Insert spread rivets supplied in the holes made, and
spread out.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 290 330 -340 / Issue: 09.11.2018 / TSch
34
Fax -135