AC Schnitzer 5111 290 330 Montageanleitung Seite 32

F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter M5 (F90)
Fitting...
Fig. 28
The holes in the AC Schnitzer front splitter and centre
web must align.
If necessary, affix with masking tape.
Figs. 29 & 30
Make a 6 mm hole in the standard front skirt through
the rear hole in the AC Schnitzer centre web. Attach
the AC Schnitzer centre web at the drilled hole using
the cap-head bolts M6x50mm, washers U6.4x18mm
and self-locking nuts M6 supplied. Only tighten lightly
- do not tighten fully.
Then through the front hole, drill another 6 mm hole in
the standard front skirt and attach using the cap-head
bolts M6x50mm, washers U6.4x18mm and self-lock-
ing nuts M6 supplied.
Now tighten the rear fixing bolt and nut.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 290 330 -340 / Issue: 09.11.2018 / TSch
32
Fax -135