AC Schnitzer 5111 290 330 Montageanleitung Seite 20

G e n e r a l N o t e s !
AC Schnitzer Front Splitter M5 (F90)
Important Notes !
These Fitting Instructions must be read in full before beginning installation work. AC Schnitzer bears no liability for
damage caused by incorrect installation !
These Fitting Instructions are intended solely for use by authorised AC Schnitzer dealers.
These Fitting Instructions are in all cases directed at professionals trained in BMW vehicles who have the
corresponding specialist knowledge.
All diagrams show LHD vehicles, for RHD vehicles proceed accordingly or follow separate Fitting Instructions.
Fitting
Carry out all work in accordance with applicable safety regulations (e.g. wear safety goggles).
The AC Schnitzer front splitter is only fitted in conjunction with...
... AC Schnitzer Carbon Front Spoiler Elements 5111 290 710
Fitting Time (1 unit = 5 minutes)
The fitting time is around 24 units, which may vary depending on vehicle condition and equipment level.
Tools Required
Masking tape
Air saw or similar
Various screwdrivers
Various Allen key T-wrenches
Various Torx drivers
Cordless drill with various bits
Various hex spanners and hex insert wrenches
Reversing ratchet with extension and various sockets
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 290 330 -340 / Issue: 09.11.2018 / TSch
20
Fax -135