En - Electrical Connection; Additonal Light Switch - Miele DSM 400 Funktionsbeschreibung/Montageanweisung

Additonal light switch

(connection must be made a suitably
qualified electrician only)
en – Electrical connection
^ Before connecting to an additional
light switch the lid of the control
module has to be taken off. It is
refitted later.
^ Terminal a must be bridged.
^ Connection can be made to a light
switch in the home via the middle
terminal b in the control module.
This will then enable the cooker hood
lighting to be switched on and off, or
dimmed.
If the hob lighting is activated by an
external lightswitch, the canopy tilts
forwards and the hob lighting is
switched on.
If the hob lighting is switched off, the
canopy remains open.
The feature lighting cannot be operated
via the control module.
The lighting can still be operated as
usual via the controls on the cooker
hood.
After the installation is completed, a
safety check must be carried out in
accordance with national and local
regulations (e.g. VDE 0701-1).
7