SATA J-Serie Bedienungsanleitung Seite 13

1 ） Do not abuse the electric tool and select the appropriate electric tool according to the application. The appropriately designed
electric tool will make your work more efficient and safer.
2 ） The electric tool shall not be used if the switch is unable to turn on/off the power. Electric tools that cannot be controlled with
switches are dangerous and shall be repaired.
3 ） Before making any adjustments, replacing the accessories or storing the electric tool, remove the plug from the power supply and/
or disengage the battery box from the tool. This protective measure will reduce the risk of accidental start of tool.
4 ） Place the unused electric tool outside the reach of children, and do not let the electric tool operated by the people who are not
familiar with the electric tool or who do not understand these instructions. The electric tool is a potential threat in the hands of
untrained users.
5 ） Maintenance of electric tool Check whether the moving parts are in place or stuck, check the parts for damage and other
conditions that affect the operation of electric tool. The damaged electric tool shall be repaired before use. Many accidents are
caused by poorly maintained electric tools.
6 ） Keep the cutting tool sharp and clean. Well-maintained tools with sharp cutting edges are not easy to get stuck and easy to control.
7 ） Use the electric tool, accessories, cutter bit, etc. in accordance with the instructions, taking into account the operating conditions
and works to be performed. Applying the electric tool for operations that do not match the purpose may be dangerous.
General safety warning of electric tool - use and precautions of battery tool:
1 ） Charge the battery only with the charger specified by the manufacturer. Unmatched charger and battery pack may cause the risk
of fire.
2 ） Use the electric tool only if a dedicated battery box is provided. Unmatched battery pack may cause the risk of damage and fire.
3 ） When the battery box is not in use, keep it away from other metal objects, such as the clip, coin, key, nail, screw or others, to
prevent one end from being connected to the other end. A short circuit at the end of battery may cause a fire.
4 ） The abuse will make the liquid splash out of the battery. Therefore, the exposure shall be avoided. In case of accidental exposure,
rinse it with water. In case of splash into the eye, seek the medical assistance. Liquid spilled from the battery may cause the
corrosion or burning.
General safety warning of electric tool - repair:
1 ） Have the qualified maintenance personnel to repair the electric tool with the same spare parts. This will ensure the safety of the
electric tool being repaired.
Professional requirements:
1 ） Be sure to take out the battery pack before repairing the machine.
2 ） Do not place the machine in the rain or water.
3 ） Do not store the battery pack above 40 ° C.
4 ） Charge the battery from 0 to 30 ° C, preferably 18 to 24 ° C.
5 ） Only use the accompanied charger and battery pack.
6 ） Avoid the short circuit of battery pack. （For example: do not make the bolts and nails touch the positive and negative poles of
battery pack）.
7 ） Do not burn the battery pack or discard it in the fire. Otherwise, an explosion may occur.
8 ） Do not charge the damaged battery pack.
9 ） Replace the damaged power cord timely.
10） Be sure to pull the plug off before removing the battery pack.
11） During the charging, it is normal for the charger and battery pack to heat up.
12） When the machine is not in use, do not insert the charged battery pack into the charger.
13） After the charging is over, please pull the battery pack off the charger immediately.
14） During the operation, it is normal for the body and battery pack to heat up.
51073
中文
EN DE RU KO PT JA ES
13