Herunterladen Inhalt Inhalt Diese Seite drucken

Alpha tools ASB 24 Bedienungsanleitung Seite 11

Elektronik-akku-bohrschrauber mit drehmomenteinstellung
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Anleitung ASB 24 AlphaTools
ries. Should contact arise
nevertheless, wash the affec-
ted area of skin immediately
with soap and water. If battery
acid gets in your eye, rinse the
eye with clear water for at least
If the battery pack fails to become
10 minutes and consult a doc-
charged, please check
tor immediately.
9. Protect the charger and its
cable from damage and sharp
edges. Damaged cables are to
be replaced immediately by an
electrician.
10. Examine your tool for any signs
If the battery still fails to become
of damage. Have repairs car-
charged, please return
ried out only by an electrician.
11. Make sure that the contacts of
the Ni-Cd battery pack do not
to our Customer Service
touch other metallic objects,
Department.
e.g. nails and screws. Risk of
Timely recharging of the Ni-Cd bat-
short-circuiting!
tery pack is recommended in the
interest of long battery life.
Recharging is always necessary
Putting into operation:
when you notice that the power of
Loading the Ni-Cd battery pack
the battery-powered drill/screwdri-
ver is decreasing.
1. Check that your mains voltage
is the same as that quoted on
Never allow the battery pack to
the rating plate. Insert the char-
discharge completely. This will
ger in a socket-outlet.
result in damage to the Ni-Cd bat-
2. Pull the battery pack out of the
tery pack!
handle (Figure 6) by depres-
sing the clips on the side.
3. Insert the battery pack in the
Adjusting the torque (Figure 1)
charger. The green LED lights
The Alpha-tools battery-powered
up. Press the "Set" button to
drill/screwdriver is equipped with a
charge the battery. The red
10-step mechanical torque adjust-
LED lights up during the char-
ment facility. The torque for a speci-
ging cycle. When charging
18.02.2003
12:46 Uhr
GB
finishes after approx. 1 hour
the green LED lights up. The
temperature of the battery may
rise slightly during the charging
operation. This is normal.
whether there is voltage at the
socket-outlet
whether there is proper contact
at the charging contacts on the
charger.
the charger
the battery pack
11
Seite 11

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

45.129.20

Inhaltsverzeichnis