Product Description - 3M DBI-SALA Flexiguard M100 Handbuch

;
Prior to installation and use of this equipment, record the product identification information from the ID label in the
Inspection and Maintenance Log (Table 2) at the back of this manual.
;
Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3M website or contact 3M
Technical Services for updated instruction manuals.

PRODUCT DESCRIPTION:

Figure 1 illustrates the 3M™ DBI-SALA
used to provide an adjustable Fall Arrest anchor point for a worker. These instructions cover use of the M100 Jib Boom, but use
of the M100 Jib System requires use of a Jib Base (sold separately) in addition to the Jib Boom. For a list of compatible Jib Base
models, see Figure 1.
Figure 2 illustrates components of the M100 Jib Boom. See Table 1 for Component Specifications.
The Fixed Upright Assembly (A) serves as the main body of the Jib Boom. The Gusset (C) braces the Rail Assembly (D), which
lets the user move within the established work area. The Connection Eye (E) secures an SRD as a connection point for the user.
The Lifting Ring (F) is used to secure a chain or web strap for transporting the system. For B2 models, the Adjustment Channel
(M) enables height adjustment of the Jib Boom. For B1 models, the Adjustable Upright Assembly (B) enables height adjustment in
coordination with the Adjustment Winch (G). The cable of the Adjustment Winch is connected to the Jib Boom through a series of
pulleys, including the Lower Pulley of the Locking Assembly (I) and Upper Pulley (J). The Rotation Handle (H) allows for rotation
of the Jib Boom after placement. The Rotation Pin (K) secures the Jib Boom to prevent rotation. For B1 models, the Transportation
Pin (L) is used to secure the Jib Boom during transportation.
System Specifications:
Capacity: One person with a combined weight (clothing, tools, etc.) of no more than 310 lb. (140 kg).
Anchorage:
See the User Instructions for your Jib Base for more information on loading requirements of structure.
Dimensions: See Figure 1 for the dimensions of each M100 Jib Boom model.
Product Weight: See Figure 1 for the weight of each M100 Jib Boom model.
Maximum All connecting subsystems (SRDs, Energy Absorbing Lanyards, etc.) used with the Jib Boom must limit
Arresting Force: the Maximum Arresting Force to 1,350 lbf (6.0 kN).
Maximum
17.0 in. (432 mm)
Deflection:
Certification: M100 Adjustable Jib Booms when used with 3M Jib Bases:
Portable Bases
8530869
8530870
8530873
Permanent Bases
8530871
8530872
Jib Boom The M100 Jib Boom models covered in these instructions are compatible only with those Jib Base models
Compatibility: listed on the front cover of these instructions.
Component Specifications:
Figure 2
Reference Component
A
Fixed Upright Assembly
B
Adjustable Upright Assembly
C
Gusset
D
Rail Assembly
E
Connection Eye
F
Lifting Ring
G
Adjustment Winch
Flexiguard™ Modular Jib System M100 Adjustable Jib Boom. The M100 Jib System is
®
Table 1 – Specifications
EN795.2012
Certified (Type E)
Certified (Type E)
Certified (Type B)
Meets (Type A)
Meets (Type A)
Materials
Steel
Steel
Steel
Aluminum
Stainless steel,
plastic wheels
Steel, stainless steel
Plastic, steel, aluminum
11
Figure 2
Reference Component
H
Rotation Handle
I
Locking Assembly
J
Upper Pulley
K
Rotation Pin
L
Transportation Pin
M
Adjustment Channel
N
Rotation Stop
OSHA 1926.502
OSHA 1910.140
Certified
Certified
Certified
Certified
Certified
Materials
Rubber, steel
Plastic, steel
Plastic
Steel
Steel
Steel
Steel