Traedgard Design KOMPAKT MIDI Handbuch Seite 29

EN
SECURE THE GAS CYLINDER
Attach both cylinder holders to the rear of
the device, use 4 x M5 x 12 bolts, M5
washers and M5 nuts.
Place the gas cylinder in the housing.
Connect the gas cylinder to a pressure
regulator. Read the instructions attached to
the regulator for connection to a gas
cylinder.
Close the cylinder brackets as shown in the
picture. The brackets must tightly enclose the gas cylinder.
CAUTION: Make sure that the cylinder brackets do NOT affect other parts.
28