Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Use the M5x12 screws twice to attach the handle:
Place a filled and suitable gas bottle in the housing and connect it properly.
Loosen the ignition switch by turning it and insert an AAA battery. Pay attention to
the correct polarity.
ATTENTION: Make sure that the hose does not touch any high temperature
surfaces, otherwise it can melt and leak and cause a fire or an explosion! After
placing the gas bottle inside the heater, secure the gas bottle with the block strap.
The heater should be mounted on a flat, stable and heavy platform with a minimum
height of 40 cm above the floor.
25
Werbung
Inhaltsverzeichnis
Fehlerbehebung
