Inhaltsverzeichnis
Werbung
Video Intercom D Series Door Station User Manual
2. Select the door and edit the door name.
3. Set door contact status.
4. Set lock action time.
5. Click Save to enable the settings.
Card Security
Click Access Control → Card Security to enter the settings page.
Slide to enable card encryption parameters. Click Save to enable the settings.
Elevator Control
Before You Start
•
Make sure your door station is in the mode of main door station. Only the main
door station support elevator control function.
•
Make sure your door station has been connected to the elevator controller via
RS-485 wire if you want to use RS-485 interface.
Steps
1. Click Access Control → Elevator Control to enter the corresponding
configuration page.
51
Werbung
Inhaltsverzeichnis
