HIKVISION D Serie Bedienungsanleitung Seite 58

Video Intercom D Series Door Station User Manual
2. Check Enable Motion Detection to enable the function.
3. Click Draw Area.Click and drag the mouse on the live video to draw a motion
detection area. Click Stop Drawing to finish drawing one area. Click Save to save
the settings.
Clear Area
Adjust Sensitivity
4. Click Arming Schedule to edit the arming schedule.
5. Click on the time bar and drag the mouse to select the time period. Click Save to
save the settings.
Delete Schedule
6. Click Linkage Method to enable the linkages.
Figure 6-11 Motion Detection
Click Clear All to clear all of the areas.
Move the slider to set the sensitivity of the detection.
Click Delete to delete the current arming schedule.
45