Problems & Solutions - P.Lindberg 9061374 Original Bedienungsanleitung

Problems & solutions
Problem
The shredder does not
perform properly: the
is not pulled in by the
machine itself. The chips do
not have the same size.
The engine does not start/
the engine shuts off by itself
The rotor jams
The engine will not
start/turn because the rotor
is jammed.
P. Lindberg A/S
Tlf: 70212626
Cause
-The blades are
wood much
-The diameter of the
branches inserted into
the machine is too
large
-There is too big a gap
between the fixed blade
and the counter blade:
correct gap is 0.5 mm
(half a millimeter)
-Electrical problem
the engine
-No fuel
-No or not enough oil in
the engine (the oil
should be level
threads of the filler
hole.)
-the diameter of the
branch is too big
-there are unacceptable
materials such as
stones or metal in the
input tube
-a length of branch
remains in the rotor
after the engine was
last stopped.
Sdr. Ringvej 1
DK-6600 Vejen
Solution
worn too -Change or sharpen the blades
and counter-blade. Note that
the blades are sharpened on
both edges so they can be
reversed.
-Shut the engine off and remove
the branch that is too thick
-Adjust the gap between the
blade
and the counter-blade by
moving the counter-blade in the
slots
with Check that
-The input tube is correctly fitted
and the bolts are tight
-Put the start-switch of the
engine " On"
-De-activate the emergency
with the
switch (turn the knob)
-Check oil and fuel levels
-Contact
lmportant: Screw back the blade
bolts.
-shut off the
the spark plug cap and turn
the rotor counter-clock-wise.
Use a wooden stick to turn the
rotor and to remove the
material from the rotor and
input tube.
lf necessary,
the bearing housing and rotate
the rotor axle with a spanner.
lf necessary,
or output tube to facilitate
access to the rotor.
Check the sharpeness of the
blades and counter blade and
replace them if necessary.
lmportant:
bolts.
11
your dealer
engine, remove
remove the cap of
remove the input
Screw back the blade
MAN 9061374 EN V2
www.p-lindberg.dk
e-mail: salg@p-lindberg.dk